Baby Wool Shoes, Sock Machine Design and Make Baby Sneakers But Made of Wool, Tejer Calcetines De Maquinaria

Product Description

Brief introduction:
1, Application

This is 3.75 inch terry and plain socks making machine which is designed as a double-use socks machine. The machine can make both thin (summer) socks and thick (winter socks)  and more popular in countries 

2, Standard configuration

1. Controller: Mingde controller is adopted, which is compatible with glory system, Glory, Hengqiang(Jiagu Software) are also optional
2. Servo Motor: Royaltec or Y.M.C, both of them are stable in performance and less repair rate
3. Pneumatic Cylinder: LIDING, best brand in China
4. Selector: Mingde brand as standard configuration, Fushun brand will be optional if buyer requires
5. Needles: Feijian or Golden Roc brand.
6. Cams: CR12MOV material are used instead of casting part, which has a longer life
7. Standard air valve configuration
8. Package: Plywood case, usually 18 sets can be loaded in a 20ft container and 39 sets in a 40ft container
9. Electricity Required: 380V 3-phase
3, Optional Configuration
1. Suction fan motor 1.1kw (for small quantity of sock machine, below 10 sets, individual suction fan motor is suggested, if over 10 sets, central suction fan motor is better, which can help save electricity consumption greatly)
2. Solenoid on main feeders, sub-feeders, valve box
3. Double elastic motors, double elastic feeders 
4. Invisible sock function 
5. BTSR yarn break sensors
6. LGL or Chinese brand accumulators
7. Robert yarn creels
8. Power: 220V 3-phase
9. Machine colors: blue or grey
4, Needle counts.

96N, 108N is for baby aged 1-3 years old.

108N, 120N is for children aged 4-10 years old

120N, 132N is for teenager aged 11- 16 years old

144N, 156N, 168N for adults.

168N, 200N for high quality male socks
5, Pre-production equipments
1. Air compressor
It is used to press the air to help sock machine change the working needles. 
2. Air storage tank
It is used to storage the pressed air.
3. Cooling drier & Filter
They are used to filter the water vapour, impurity, etc.
4. Stabilizer
It make the voltage stable, then reduce the damage of socks machine. 
5. Suction fan motor
It is an equipment which is used to suck the finished socks up from socks machine. There are two kinds can be choosen: 1) Individual suction fan motor: if the quantity of socks machine is 1, 2, 3 or 4 sets, this motor will be suitable because it is installed inside of machine which can save the space; 2) Central suction fan motor: it is suitable for a large quantity of socks machine because one set motor can support 5sets, 10 sets, 20 sets even more socks machine working.
6, Parameters:

3.75 Inch Plain & Terry Socks Knitting Machine Technical Specification
Cylinder Diameter	3.75"(3.5''/4.5''/5'')
Needle Number	72N-168N, 200N
Maximum Speed	280~330 R.P.M
Driving Control	Servo Motor
Servo driving/motor Power	0.85KW
Voltage	380V/220V(optional)
Main Motor	1.3KW
Fan	≥1.1KW(Optional)
Control Box	0.8KW
Site Area	150*100*200cm
Net Weight	250KG
Gross Weight	305KG
Package Size	90*75*160cm (1.08CBM)
Production Capcity	250~350pairs(terry socks); 300~380 pairs/(plain socks)24 hours according to different sizes of socks

Detail machine pictures, all photoes are for 100% real shooting ! For more pictures, video and details, please email me!






This machine can be used after open end yarn spinning line:


open end yarn raw material can be produced from recycling production line from waste colth, garment and other textile fabric.